10 Recording Tips for Electric Guitar Players – part1

10 Recording Tips for Electric Guitar Players – Part 1

Recording your own music can seem daunting and there are many different ways to achieve great results. Fortunately, recording your own music has never been easier. Perhaps even more significantly, great results can be achieved at home or in a small project studio for a relatively modest budget. You just need to get the basics right, and the rest will become easier.


1. First things first – setting up your guitar

It might seem obvious, but you’d be surprised how many times this issue occurs during recording sessions. If your instrument is poorly maintained, with strings that haven’t been changed in years, and with poor intonation setup – everything you do afterwards will be a waste of time. Any attempt to fix these issues after you’ve recorded, would require specialist plugins (such as Melodyne), and will take you many hours to complete (if it works at all!). Invest into a new set of strings and have your intonation checked prior to recording for the best possible tone and tuning stability.

The accuracy of your tuner becomes critical in this scenario, particularly if you plan to intonate your own guitar. Cheap guitar tuners can be inaccurate for even basic tuning applications – let alone setting up your guitar correctly. Investing in a good guitar tuner is essential. Shure do not produce a stand alone tuner, however, the Shure GLX-D16 (Beta Digital Wireless Guitar Pedal System) does feature a sophisticated strobe and meter tuning function. Strobe tuners are best suited to setting your guitars intonation due to their high sensitivity and accuracy. Not to mention, you’ll also be able to go wireless on stage and tune silently – all in one!

Try this trick for extra tuning stability next time you setup….. Graphite nut – some guitar players use a standard pencil to rub graphite into the nut when changing strings. Graphite acts as a lubricant, and will prevent your strings from getting caught in the nut. There are commercial products on the market, but a pencil will do the job at no cost.

2. Choose the right microphone

For electric guitars, the SM57 is a great place to start. Countless engineers and guitarists use the SM57 as their go-to mic when recording guitars. Some famous examples that spring to mind include Fleetwood Mac Rumours, and Radiohead’s O.K Computer. The SM57′s well positioned presence peak & high SPL handling help make it an industry standard for guitar cabs and more. There are arguably many other more interesting options available from Shure, but it is the reliability and dependability that makes the SM57 a ‘Swiss Army Knife’ of the microphone world. Ken Caillat (engineer for Fleetwood Mac) is pretty clear on his love the SM57, stating the following in his Shure interview – “I work more as a producer these days than an engineer. I always take an SM57 with me, and compare every mic in the studio. 99% of the time, my favourite mic is the SM57″

Microphone selection is of course a very personal thing, and for those looking to experiment beyond the familiarity of the SM57, there are many other factors to consider. For the purpose of this blog, we’ll stick to the basics. But essentially, you can choose between 3 microphone types: Dynamic, Condenser, and Ribbon. Here are some Shure examples to consider:

Large Diaphragm Dynamic Mic – SM7B. The SM7 is often referred to as the “SM57 on Steroids”. The larger housing and diaphragm help to increase low end response, and depending on your application, this may be an advantage. You can read more on the differences between the SM57 & SM7B in our previous blog covering this topic.

Condenser Mic – SM27. For some engineers, the more narrow frequency response of a dynamic mic is too limiting, or simply not to their taste. Some prefer the wider frequency response and greater sensitivity of a condenser mic. If this is your thing, the Shure SM27 is a great option with its flat frequency response and a -15db switchable attenuator, which makes it perfect for handling high SPL levels typical of electric guitar amps.

Ribbon Mic – KSM313. Ribbon microphones were once the staple of the recording industry, but fell out of favour to more durable condenser mics. Their smooth high frequency response and musicality makes them a popular choice for recording electric guitars with a smoother high end. Traditionally, their achilles heel has been the delicate ribbon, which can be susceptible to damage if dropped or if a gush of air breaks the ribbon.

The KSM ribbon mics help to resolve this issue with Roswellite™ ribbon material, which replaces traditional foil ribbons for superior durability and resilience at extreme SPLs. Producer Chris Kimsey (Rolling Stones) recently proclaimed the KSM313 as his new favourite mic; stating the following in a recent recording session for Shure’s Call For Legends Competition: “I am hugely impressed with this mic. I think this will almost be a secret weapon for me from now. I think you just need to get people to try this mic and I guarantee you they will start using it. We ended up using the KSM313 mic on guitars and on vocals – the fact it is dual voice makes it multi-purpose and essential!”


3. Make it a combo?

We’re all familiar with the classic rock n’ roll image of oversized 100 watt stack amps on stage. You could justify an amp of this size if you’re rocking out Wembley Stadium, but do you really need 100 watts of power in a studio? Guitarists will be familiar with how thin an amp can sound at low volume and how you need to get a decent amount of heat into those valves before the true tone of your amp can be unleashed. Therefore, wouldn’t you be better off with a small combo, say down to 15 watts but run nice and hot? Not to mention the advantage of small single speaker combos when it comes to mic positioning. It’s much easier to mic a single speaker cone! Consider downsizing your amp next time you record – you might be surprised how less can be more in this instance.

4. Mic placement

So, you’ve setup your guitar, selected your mic, and chosen a suitable amp. You’re nearly ready to rock, but first, you’ll want to invest some time getting the mic positioned in a way that does your efforts justice. Get it wrong, and you could have a headache on your hands during the mix, get it right, and your mix should be halfway there already. Once again, for the purpose of this blog, we’ll stick to the basics.

If you’re only using one microphone, position the mic somewhere between the dust cover and the speaker cone, and an inch or so from the speaker cone. From here you can begin to tweak your mic position with the following in mind: brightness and low frequencies, driven by the proximity effect (more on this later). In a nutshell, as you move your microphone closer to the centre of the speaker cone, the tone will become brighter. In most cases, somewhere in-between the edge of the speaker cone and the centre will give you a balanced tone that works best for everything from clean to distorted sounds. Once you have the brightness balanced to taste, you now need to consider the lower frequencies, which brings us neatly on to tip number 5.

5. Understand the proximity effect

Proximity effect is a phenomenon inherent in microphones with a directional pickup pattern whereby as the mic is moved closer to the sound source the bass frequencies are emphasised. This is caused by ports used to create directional polar pickup patterns, and so omni-directional microphones do not produce this result. With this in mind, the proximity effect can be used to your advantage – enabling you to either emphasise or control the bass on your guitar depending in how close the mic is to the grill. The ability to exploit the proximity effect, is one of the elements that make the SM57 so popular for guitar. Because the ball grill is absent from the SM57, you can position the mic closer to the sound source, and thus, emphasise the bass considerably more that you could with the SM58. You can read more on the difference between the SM58 and SM57 here.

Play For LA

Join us for part-2 – coming soon. Plus, Introducing – Shure Play for LA – The Shure Guitar Competition….

In part 2, we’ll look at crafting the right guitar tone, recording the best possible take, and much more. Subscribe to our Shure Benelux newsletter to be alerted.

Additionally, at the time of writing, Shure are searching across Europe, for the very best amateur guitar players. In exchange for your guitar prowess, Play for LA is your chance to win an unforgettable trip to LA California, tickets to NAMM show 2016, a (GLX-D16) Shure Beta Digital Wireless Guitar Pedal System, and more guitar gear!

Head over to our Guitar Wireless Page and find out how to enter!
For Belgium
For the Netherlands

Join the conversation and search #PlayforLA today.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s